Page 76 ST 700 SmartLine Pressure Transmitters User’s Manual Revision 13
5.4.1 Editing a Numeric value
Editing of a numeric value is a digit-by-digit process, starting with the left-most digit.
1. Press to begin the edit process:
• The basic and standard display will display the current value of the item on the lower
line, left justified.
• Basic Display: Press the or buttons to select the relevant digit, and then press to
advance to the next digit to the right.
• Standard Display: Press the button to select the relevant digit, and then press (both
button simultaneously) to advance to the next digit on the right.
2. Basic and standard displays: After the last digit has been entered, press one more time to
write the new value to the transmitter.
To Next Page
Loading...
