Revision 12 ST 700 SmartLine Pressure Transmitters User’s Manual Page 129
12.4.1 Summary
ST 700 basic transmitter models, except flush mounts and those with integral flanges, can be attached
to a two-inch (50 millimeters) vertical or horizontal pipe using Honeywell’s optional angle or flat
mounting bracket; alternately you can use your own bracket. Flush-mount models are attached
directly to a process pipe or tank by a one-inch weld nipple. Models with integral flanges are
supported by the flange connection.
Figure 44 – ST 700 Basic Transmitter - Typical Bracket Mounted and
Flange Mounted Installations
To Next Page
Loading...
