Page 200 ST 700 SmartLine Pressure Transmitters User’s Manual Revision 13
13.2.5 Selecting a new setting from a list of choices
Use the procedure described below to select a new setting for parameters that present a list of choices
(e.g. PV display, Pressure Units, and so forth.).
1. Press to begin the edit process.
a. The standard display will show the current setting of the item on the lower line
2. Press the buttons to scroll through the list of choices.
3. Press to make your selection. The new selection will be stored in the transmitter and will
be displayed on the lower line.
To Next Page
Loading...
