Honeywell SmartLine ST 700 - 2. Introduction to the ST 700 Standard Transmitter; 2.1 Features and Options

Revision 13 ST 700 SmartLine Pressure Transmitters User’s Manual Page 3
,
2. Introduction to the ST 700 Standard Transmitter
This section is an introduction to the physical and functional characteristics Honeywell’s family of the
ST 700 Standard transmitters.
2.1 Features and Options
The ST 700 standard transmitter is available in a variety of models for measuring Differential
Pressure (DP), Gauge Pressure (GP), and Absolute Pressure (AP). Table 2 lists the protocols, human
interface (HMI), materials, approvals, and mounting bracket options.
Table 2 – Features and Options_ST 700 Standard transmitter
Feature/Option
Standard/Available Options
Communication Protocols
HART

version 7, Digitally Enhanced (DE), Fieldbus
Human-Machine Interface (HMI)
Options (Basic Display/Standard
Display)
Basic Digital Display:
• Three-button programming (optional)
• Basic display language: English only
Standard Display (HART

only):
• Two integral buttons programming (optional).
• Standard display languages: English and
Russian.
• Two-mode operations: PV display and Menu
Navigation.
Calibration
Single
Approvals
See Appendix A for details
FM, CSA, ATEX, IECEx, SAEx, INMETRO, NEPSI, EAC,
KOSHA
Mounting Brackets
Angle/flat carbon steel/304 and 316 stainless steel,
Marine 304 stainless steel, 316 Stainless Steel.
Integration Tools
Experion
The three-button option is available for the basic display.
The two-button option is available for the standard display.
Also, for the basic display, the three button reed switch is used only for span & zero
correction and not for the display navigation.