Revision 13 ST 700 SmartLine Pressure Transmitters User’s Manual Page 77
5.4.2 Selecting a new setting from a list of choices
Use the procedure described below to select a new setting for parameters that present a list of choices
(e.g. PV display, Pressure Units, etc.).
1. Press to begin the edit process.
a. The basic display will show the current setting of the item on the lower line, left
justified.
2. Press the or buttons to scroll through the list of choices.
Press to make your selection. The new selection will be stored in the transmitter and will
be displayed on the lower line, right justified.
To Next Page
Loading...
