Honeywell SmartLine ST 700 - 14. Maintenance - ST 700 Basic Transmitter; 14.3 Inspecting and Cleaning Barrier Diaphragms

Revision 12 ST 700 SmartLine Pressure Transmitters User’s Manual Page 193
Screen3 Pressure
Custom Unit
[59PCUNIT]

When “Custom” selected for
Screen3 Pressure Units,
enter the custom unit name.
Character string of pressure
custom unit text for display
x = any Alphanumeric value
Press  to
enter menu
selection
 to select
alphanumeric
character.
 to enter
and shift to
the next
character to
the right
Screen3 Pressure
Scaling Low
[60PSCLLO]
########
When “Custom” selected for
Screen3 Pressure Units,
enter the Screen3 Pressure
Scaling Low value.
Value of the pressure
custom engineering unit
corresponding to the LRV of
the transmitter
The limits are:
-999999 to 999999
Press  to
enter menu
selection
 Menu to
select
number.
 to enter
and shift to
the next digit
to the right
Screen3 Pressure
Scaling High
[61PSCLHI]
########
When “Custom” selected for
Screen3 Pressure Units,
enter the Screen3 Pressure
Scaling High value.
Value of the pressure
custom engineering unit
corresponding to the URV of
the transmitter
The limits are:
-999999 to 999999
Press  to
enter menu
selection
 Menu to
select
number.
 to enter
and shift to
the next digit
to the right
Screen4 PV
Selection
[62SCRN4]
Display PV enumerations:
0-None
1-Давл-ие (PRESURE)
2-%Выхода (% OUT)
3-ТокВыхд (LOOPOUT)
4-Расход (FLOW)
Select Process Variable
(PV) to be shown on the
display from list.
Press  to
enter menu
selection
Menu to
select from
list
 to enter