Revision 12 ST 700 SmartLine Pressure Transmitters User’s Manual Page 227
Table 44 – ST 700 Basic Transmitter STG735, 745, 775, STD 725, 735,
775 & STA725 & 745, Transmitter Body.
(Refer to Figure 72)
51452865-501
51452865-502
51452865-503
51452865-504
Glass Filled PTFE
VITON
100% PTFE
GRAPHITE
Each Meter Body Gasket Kit includes:
Gasket, Process Head (6 Gaskets/ 1 Kit)
Gasket, Flange Adapter (6 Gaskets/ 1 Kit)
O-Ring, Meter Body to Electronics Housing (3 Gaskets/ 1 Kit)
K7 Process Head Gasket Kits
51452868-501
51452868-502
51452868-507
Gasket only, Process Head (12 PTFE Gaskets/pack)
Gasket only, Process Head (6 Viton Head O-Rings)
Gasket only, Process Head Graphite Gasket (use only as
replacement of existing graphite gasket)
Flange Adapter Gasket Kits
51452868-504
51452868-505
51452868-508
Gasket only, Flange Adapter, 6 PTFE Adapter Gaskets
Gasket only, Flange Adapter, 6 VITON Adapter O-Rings
Gasket only, Flange Adapter Graphite Gasket (use only as
replacement of existing graphite gasket)
½-inch NPT Flange Adapter Kits
51452867-110
51452867-210
51452867-310
51452867-410
51452867-150
51452867-350
51452867-130
51452867-330
Flange Adapter Kit, with:
SS Flange Adapters and with carbon steel bolts
SS Flange Adapters and with A286 SS (NACE) bolts
SS Flange Adapters and with 316 SS (non-NACE) bolts
SS Flange Adapters and with B7M alloy steel bolts
Monel Flange Adapters and with carbon steel bolts
Monel Flange Adapters and with 316 SS (non-NACE) bolts
Hastelloy C Flange Adapters and with carbon steel bolts
Hastelloy C Flange Adapters and with 316 SS (non-NACE) bolts
Each ½-inch NPT Flange Adapter Kit includes:
½-inch NPT Flange Adapter
Bolt, hex head, 7/16-20 UNF, 1.50 inches long