Honeywell SmartLine ST 800 - Page 48

38 ST 800 Pressure Transmitter User’s Manual Revision 15
Install Date
<Return>
Year
# # # #
Enter the current year.
This item will only be visible if
no Install Date has been written
to the transmitter.
Month
January -
December
Select the current month. This
item will only be visible if no
Install Date has been written to
the transmitter.
Day
# #
Enter the day of the month. This
item will only be visible if
no Install Date has been written
to the transmitter.
Install Date
dd-mmm-yyyy
If no Install Date has been set in
the transmitter, this value is a
preview of the Year, Month, and
Day entered above.
Otherwise, this is the Install
Date that was previously
written to the transmitter.
Write Date
Press ENTER to write the Install Date to the transmitter.
CAUTION: The Install Date can only be written once
in the life of the transmitter. You cannot erase or
overwrite the Install Date once it has
been written.
PILD
(Available
only if the
PILD option is
enabled)
<Return>
PILD
Disabled
Disables PILD detection
Press  to enter
menu selection
 and  to select
Disabled or
Enabled.
 to initiate.
This option will
be available only
if sensor supports
PILD
feature
Enabled
Enables PILD detection
Application
<Return>
See Note below.
Press  to enter
menu selection
 and  to select
Application Type.
 to initiate.
DP Flow (Available
only for DP transmitter)
Marine Level
Bubbler Level
Other