323
# Specify the authentication method for user client002 as publickey, and assign the public key
Switch001 to the user.
[Switch] ssh user client002 service-type stelnet authentication-type publickey assign
publickey Switch001
3. Specify the private key file and establish a connection to the SSH server:
a. Launch PuTTY.exe to enter the interface as shown in Figure 96.
b. In the H
ost Name (or IP address) text box, enter the IP address of the server 192.168.1.40.
Figure 96 Specifying the host name (or IP address)
c. Select Connection > SSH > Auth from the navigation tree.
The window as shown in Figure 97 appears.
d. Cli
ck Browse… to bring up the file selection window, navigate to the private key file
(private.ppk) and click OK.
To Next Page
Loading...
