Installing components 36
c.
Slide up the divider locking tab to lock it.
3. Install the half-height divider.
a. Slide the divider locking tab down:
b. Align the three tabs on the bottom edge of the divider with the openings in the enclosure, and rotate
the divider counter-clockwise.
CAUTION: Be sure that all five tabs (three on the bottom edge of the divider and two on the top
edge of the divider) are fully inserted before sliding the divider forward to complete the
installation. Failure to do so can cause damage to the blade connectors during installation.
To Next Page
Loading...
