HP BladeSystem c3000 Setup And Installation

Using the HP BladeSystem Insight Display 71
The Chat Mode screen has top priority in the Insight Display and will remain on the screen until Send is
selected. The technician can leave this chat screen temporarily and use the other Insight Display screens, then
return to the Chat Mode screen from the Main Menu to send a response. After the response, the Chat Mode
screen is cleared. Both the A and ? responses are then displayed to the remote Administrator on the web
interface for LCD Chat.
USB Menu screen
Onboard Administrator firmware version 2.30 and later offers added support for the following USB key
options:
• Updating OA firmware
• Restoring OA configuration
• Saving OA Configuration
Onboard Administrator supports USB keys formatted for FAT32 or EXT2 file systems. You can use either the
port located on the active Onboard Administrator module on the front of the enclosure or a USB port on the
optional KVM module.
To access the USB Menu:
1. Insert a USB key into Onboard Administrator.
2. From the Main Menu, select USB Menu.

HP BladeSystem c3000 Specifications

General

Brand	HP
Model	BladeSystem c3000
Category	Enclosure
Language	English