HP BladeSystem c3000 Setup And Installation

Planning the installation 5
Planning the installation
Pallet contents
Item Name Description
1
HP BladeSystem c3000 Enclosure The HP BladeSystem tower enclosure
2
Device bay blank A mandatory insert installed in any unused
device bay
3
Power supply blank A mandatory insert installed in any unused
power supply bay
4
Power supply (quantity as ordered) The power supply for the enclosure
5
Half-height device (quantity as ordered) A half-height server or storage blade
6
Full-height device (quantity as ordered) A full-height server or storage blade
7
HP c-Class blade SUV cable (local I/O
cable)
A cable with serial, USB, and video connectors
that attaches to the I/O connector on the front of
a blade
8
Fan blank A mandatory insert installed in any unused fan
bay
9
HP Active Cool 100 Fan (quantity as
ordered)
A fan that cools the components installed in the
enclosure

HP BladeSystem c3000 Specifications

General

Form Factor	6U
Maximum Number of Blade Servers	8 half-height or 4 full-height
Maximum Number of Full-Height Blades	4
Cooling Fans	6 hot-plug fans
Management	HP Onboard Administrator
Interconnect Bays	4
Fans	6 hot-plug fans
Networking Options	Ethernet, Fibre Channel, InfiniBand
Power Supplies	Up to 6 (depending on configuration)