HP DesignJet Z5600 User Manual

16 Troubleshooting paper issues
●
The paper cannot be loaded successfully
●
The paper type is not in the driver
●
The printer printed on the wrong paper type
●
Automatic cut not available
●
On hold for paper
●
The roll paper will not advance
●
The paper has jammed
●
A strip stays on the output tray and generates jams
●
The printer displays out of paper when paper is available
●
Prints do not fall neatly into the basket
●
The sheet stays in the printer when the print has been completed
●
The paper is cut when the print has been completed
●
The cutter does not cut well
●
The roll is loose on the spindle
●
Recalibrate the paper advance
122 Chapter 16 Troubleshooting paper issues ENWW

HP DesignJet Z5600 Specifications

General

Print Technology	Thermal Inkjet
Number of Print Cartridges	6 (cyan, magenta, yellow, matte black, photo black, chromatic red)
Print Resolution	Up to 2400 x 1200 optimized dpi
Hard Disk	500 GB
Maximum Print Length	300 ft (91.4 m)
Connectivity	Gigabit Ethernet (1000Base-T)
Print Languages	HP-GL/2, HP-RTL
Media Sizes Supported	8.3 to 44-in wide rolls; 8.3 to 44-in wide sheets