HP DesignJet Z5600 - Insert an ink cartridge

Insert an ink cartridge
1. Before removing the cartridge from its wrapping, shake it vigorously.
2. Unwrap the new ink cartridge, nd the label identifying the ink color. Check that the letter or letters (in
these illustrations, M for magenta) marking the empty slot, matches the letter or letters on the cartridge
label.
3. Insert the ink cartridge into its slot.
4. Push the cartridge into the slot until it snaps into position. You should hear a beep and see conrmation
that the cartridge has been inserted.
If you have diiculty, see Cannot insert an ink cartridge on page 150.
5. When all cartridges have been inserted, close the cover.
6. The front-panel display conrms that all cartridges have been correctly inserted.
104 Chapter 13 Handling ink cartridges and printheads ENWW