HP DesignJet Z5600 - Color management from the front panel

Color management from the front panel
You can color-calibrate the loaded paper type from the front panel by pressing , then , then Image
quality maintenance > Calibrate color. See Color calibration on page 74.
The other color options in the front panel can all be found by pressing , then , then Printing
preferences > Color options (they can also be found under Advanced printing preferences).
NOTE: These front panel settings can all be overridden by the printer driver or Embedded Web Server job
submission settings.
All jobs
●
Color/Grayscale: you can choose to print in color or in shades of gray. Default: Print in color.
●
Select RGB source prole: you can choose from a selection of RGB source proles recognized by the
printer. Default: sRGB IEC 1966-2.1.
PostScript and PDF jobs only
●
Select CMYK source prole: you can choose from a selection of CMYK source proles recognized by the
printer. Default: US Coated SWOP v2.
●
Select rendering intent: you can select the rendering intent. Default: Perceptual.
●
Black point compensation: you can turn black point compensation on or o. Default: On.
●
HP Professional PANTONE Emulation: you can turn HP Professional PANTONE Emulation on or o.
Default: On.
ENWW Color management from the front panel 81