HP DesignJet Z5600 - Physical specifications; Memory specifications

* Satin and glossy paper only.
●
Printing resolution 2 applies to canvas, adhesive vinyl, scrim banner, backlit, proong matte, proong
gloss and digital ne arts paper.
Margins
Top, right and left margins 5 mm (0.2 in)
Bottom margin (trailing edge) 5 mm (0.2 in) (roll)
17 mm (0.67 in) (sheet)
Mechanical accuracy
±0.1% of the specied vector length or ±0.2 mm (whichever is greater) at 23°C (73°F), 50-60% relative humidity, on E/A0 printing
material in Best or Normal mode with HP Matte Film roll feed.
Graphic languages supported
HP DesignJet Languages
Z2600, Z5600 HP-PCL3GUI, HP-GL/2 and HP RTL, CALS G4, TIFF, JPEG, Adobe PDF 1.7, Adobe PostScript 3
Physical specications
Printer physical
specications
HP DesignJet Z2600 24-in
PostScript printer without stand
HP DesignJet Z2600 24-in
PostScript printer with stand
HP DesignJet Z5600 44-in
PostScript printer with stand
Weight 53.5 kg (118 lb) 60 kg (132 lb) 86 kg (189 lb)
Width 1262 mm (49.7 in) 1262 mm (49.7 in) 1770 mm (69.7 in)
Depth 702 mm (27.6 in) 702 mm (27.6 in) 721 mm (28.4 in)
Height 386 mm (15.2 in) 1050 mm (41.3 in) 1050 mm (41.3 in)
The depth is measured without the upper spindle; wall spacers up; ink cover opened; roll covers and basket
closed.
Memory specications
Memory
specications
HP DesignJet Virtual memory * Hard disk
Z5600 64 GB 320 GB
Z2600 8 GB 160 GB
170 Chapter 22 Printer specications ENWW