103
Chapter 5: Using Debuggers
Using the Microtec Research Debugger
Using the Microtec Research Debugger
Compatibility
Version 4.1 of the XRAY HP Probe debugger from Microtec Research, a
Mentor Graphics Company, is another debugger that connects to the
HP emulation probe/module.
This information in this section is intended to be used along with the
XRAY documentation provided by Microtec Research.
Overview
To get started
1 Edit the gtw.brd file.
The file gtw.brd includes example hostnames, port numbers and
initialization information for HP emulation probes/modules that might
be on the network for XRAY to connect to. The gtw.brd file is in the
“etc” directory under the Microtec tools directory.
Target
system
Or
XRAY
Host computer
Logic analysis
system with
emulation
module
Emulation
probe
LAN
Target
system
To Next Page
Loading...
