HP E3456A - Using the Green Hills Debugger; To Get Started

95
Chapter 5: Using Debuggers
Using the Green Hills Debugger
Using the Green Hills Debugger
Compatibility
Version 1.8.8.A of the MULTI Development Environment from Green
Hills Software, Inc. is one debugger that connects to the HP emulation
probe/module.
This information in this section is intended to be used along with the
MULTI documentation provided by Green Hills Software.
Overview
MULTI connects to an emulation probe/module through the Green Hills
host-resident program (hpserv).
To get started
1 Build the executable.
If you have the demo software shipped with the Green Hills debugger,
follow these steps:
a Prepare the executable.
Target
system
Or
MULTI
hpserv
Host computer
Logic analysis
system with
emulation
module
Emulation
probe
LAN
Target
system