HP ProCurve 2910al Switch User Manual

Intelligent Edge Software
Features
Manual
Management
and
Configuration
Advanced
Traffic
Management
Multicast and
Routing
Access
Security
Guide
RMON 1,2,3,9
Routing
Routing - IP Static
X
X
X
Secure Copy
sFlow
SFTP
SNMPv3
X
X
X
X
Software Downloads (SCP/SFTP, TFPT, Xmodem)
Source-Port Filters
Spanning Tree (STP, RSTP, MSTP)
SSHv2 (Secure Shell) Encryption
X
X
X
X
SSL (Secure Socket Layer)
Stack Management (3500yl/6200yl switches only)
Syslog
System Information
X
X
X
X
TACACS+ Authentication
Telnet Access
TFTP
Time Protocols (TimeP, SNTP)
X
X
X
X
Traffic Mirroring
Traffic/Security Filters
Troubleshooting
Uni-Directional Link Detection (UDLD)
X
X
X
X
UDP Forwarder
USB Device Support
VLANs
X
X
X
xiii

HP ProCurve 2910al Switch Specifications

General

Model	HP ProCurve 2910al Switch
Layer	Layer 3
Jumbo Frame Support	Yes
Power Device	Internal power supply
VLAN Support	Yes
Power Supply	100-240 VAC, 50/60 Hz
Ports	24 or 48 x 10/100/1000 ports
Uplink Ports	4 x SFP (mini-GBIC)
Stacking	Yes
MAC Address Table Size	32000 entries
Routing Protocol	RIP, OSPF, BGP, IGMP
Remote Management Protocol	SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP
Features	VLAN, QoS, IPv6, ACLs
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af
Operating Temperature	0 to 45°C
Operating Humidity	15% to 95% (noncondensing)
Power over Ethernet (PoE)	PoE+ (802.3at) on PoE+ models, PoE (802.3af) on PoE models