Switch Memory and Configuration
Multiple Configuration Files
Xmodem: Copying a Configuration from a Serially
Connected Host
Syntax: copy xmodem config < dest-file > < pc | unix >
This is an addition to the copy xmodem command options. Use
this command to download a configuration file from an
Xmodem host to the switch.
For more on using Xmodem to copy a file from a serially
connected host, refer to “Xmodem: Copying a Configuration
File from a Serially Connected PC or UNIX Workstation” on
page A-27.
Operating Notes for Multiple Configuration Files
■ SFTP/SCP: The configuration files are available for sftp/scp transfer as
/cfg/< filename >.
6-41
To Next Page
Loading...
