HP ProCurve - Listing Switch Configuration and Operation Details; Web: Viewing the Configuration File

Troubleshooting
Diagnostic Tools
Syntax:
write terminal
Displays the running configuration.
show config
Displays the startup configuration.
show running-config
Displays the running-config file.
Web: Viewing the Configuration File
To display the running configuration, through the web browser interface:
1. Click on the Diagnostics tab.
2. Click on
[Configuration Report]
3. Use the right-side scroll bar to scroll through the configuration listing.
Listing Switch Configuration and Operation Details
The show tech command outputs, in a single listing, switch operating and
running configuration details from several internal switch sources, including:
■ Image stamp (software version data)
■ Running configuration
■ Event Log listing
■ Boot History
■ Port settings
■ Status and counters — port status
■ IP routes
■ Status and counters — VLAN information
■ GVRP support
■ Load balancing (trunk and LACP)
Syntax: show tech
Executing show tech outputs a data listing to your terminal emulator. How-
ever, using your terminal emulator’s text capture features, you can also save
show tech data to a text file for viewing, printing, or sending to an associate.
For example, if your terminal emulator is the Hyperterminal application
C-58