To Next Page

To Previous Page

Port Status and Configuration

Viewing Port Status and Configuring Port Parameters

Figure 10-6 shows sample output from the show tech transceivers command.

ProCurve# show tech transceivers

Transceiver Technical Information:

Port # | Type | Prod # | Serial # | Part #

-------+-----------+--------+------------------+----------

21 | 1000SX | J4858B | CN605MP23K |

22 | 1000LX | J4859C | H117E7X | 2157-2345

23 | ?? | ?? | non operational |

25 | 10GbE-CX4 | J8440A | US509RU079 |

26 | 10GbE-CX4 | J8440A | US540RU002 |

27 | 10GbE-LR | J8437B | PPA02-2904:0017 | 2157-2345

28 | 10GbE-SR | J8436B | 01591602 | 2158-1000

29 | 10GbE-ER | J8438A | PPA03-2905:0001 |

The following transceivers may not function correctly:

Port # Message

-------- -------------------------------------

Port 23 Self test failure.

Figure 10-6. Example of Show Tech Transceivers Command

Operating Notes:

■ The following information is displayed for each installed transceiver:

• Port number on which transceiver is installed.

• Type of transceiver.

• Product number—Includes revision letter, such as A, B, or C. If no

revision letter follows a product number, this means that no revision

is available for the transceiver.

• Part number—Allows you to determine the manufacturer for a spec-

ified transceiver and revision number.

■ For a non-ProCurve installed transceiver (see line 23 Figure 10-6), no

transceiver type, product number, or part information is displayed. In the

Serial Number field, non-operational is displayed instead of a serial num-

ber.

■ The following error messages may be displayed for a non-operational

transceiver:

• Unsupported Transceiver. (SelfTest Err#060)

Check: www.hp.com/rnd/device_help/2_inform for

more info.

10-10

HP ProCurve Management And Configuration Guide

Other manuals for HP ProCurve