Port Status and Configuration
Using Friendly (Optional) Port Names
Syntax: show name [ port-list ]
Lists the friendly port name with its corresponding port
number and port type. The show name command without a port
list shows this data for all ports on the switch.
For example:
Friendly port names
assigned in previous
examples.
Ports Without
“Friendly”
Figure 10-15. Example of Friendly Port Name Data for All Ports on the Switch
Port Without a “Friendly”
Name
Friendly port names
assigned in previous
examples.
Figure 10-16. Example of Friendly Port Name Data for Specific Ports on the Switch
Including Friendly Port Names in Per-Port Statistics Listings. A
friendly port name configured to a port is automatically included when you
display the port’s statistics output.
10-21
To Next Page
Loading...
Need help?
General