HP ProCurve - Page 474

File Transfers
Contents
Transferring Switch Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . A-25
Xmodem: Copying a Configuration File to a Serially
Xmodem: Copying a Configuration File from a Serially
TFTP: Copying a Configuration File to a Remote Host . . . . . . . A-26
TFTP: Copying a Configuration File from a Remote Host . . . . A-26
Connected PC or UNIX Workstation . . . . . . . . . . . . . . . . . . . . . . A-26
Connected PC or UNIX Workstation . . . . . . . . . . . . . . . . . . . . . . A-27
USB: Copying a Configuration File to a USB Device . . . . . . . . . A-28
USB: Copying a Configuration File from a USB Device . . . . . . A-29
Transferring ACL Command Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-29
TFTP: Uploading an ACL Command File from a TFTP Server A-30
Xmodem: Uploading an ACL Command File from a Serially
Connected PC or UNIX Workstation . . . . . . . . . . . . . . . . . . . . . . A-31
USB: Uploading an ACL Command File from a USB Device . . A-32
Copying Diagnostic Data to a Remote
Host, USB Device, PC or UNIX Workstation . . . . . . . . . . . . . . . . . . . A-33
Copying Command Output to a Destination Device . . . . . . . . . A-33
Copying Event Log Output to a Destination Device . . . . . . . . . A-34
Copying Crash Data Content to a Destination Device . . . . . . . A-34
Copying Crash Log Data Content to a Destination Device A-36
A-2