Selecting a Management Interface
Advantages of Using ProCurve Manager or ProCurve Manager Plus
ProCurve(config)# show running
Running configuration
; J9091A Configuration Editor; Created on release K.12.XX
hostname “ProCurve”
module 1 type J8702A
module 2 type J8702A
snmp-server community “notpublic” Unrestricted
vlan 1
name “DEFAULT_VLAN”
Shows the current banner
untagged A1-A24, B1-B24
configuration.
ip address dhcp-bootp
exit
banner motd “ This is a private system maintained by the
Allied Widget Corporation.
Unauthorized use of this system can result in
civil and criminal penalties!”
spanning-tree
Figure 2-8. The Current Banner Appears in the Switch’s Running-Config File
The next time someone logs onto the switch’s management CLI, the following
appears:
The login screen displays the
configured banner.
Entering a correct password
clears the banner and displays
the CLI prompt.
Figure 2-9. Example of CLI Result of the Login Banner Configuration
2-13
To Next Page
Loading...
Need help?
General