Monitoring and Analyzing Switch Operation
Traffic Mirroring
— Continued from Previous Page—
[ name < name-str >] : Optional; uses a previously
configured alphanumeric identifier to associate the
traffic source with the mirroring session. The string
can be used interchangeably with the mirroring
session number when using this command to assign
a mirroring source to a session. To configure an
alphanumeric name for a mirroring session refer to
the command description under “Configuring a
Source Switch for a Mirroring Destination on a
Remote Switch” on page B-44.
B-55
To Next Page
Loading...
