HP R1500 - UPS XR User Manual

Specifications 101
Specifications
Model list
Model Power levels (rated at nominal inputs)
12kVA NA UPS
12kVA or 12kW at 208 V*
8kVA NA UPS
8kVA or 8kW at 208 V*
12kVA INTL UPS
12kVA or 12kW at 400 V*
8kVA INTL UPS
8k VA or 8W at 400 V*
ERM
Up to 4 per UPS
Power Bus Bar
For up to 6 UPSs
*Derated for line cord and nominal line voltage.
UPS physical specifications
Parameter Value
Height
26.1 cm (10.3 in), 6U
Depth
66 cm (26 in)
Width
44.1 cm (17.4 in)
Weight with internal batteries
140 kg (307 lb)
Weight without internal
batteries
61 kg (135 lb)
Weight of each battery module
(four modules per UPS)
20 kg (44 lb)
Weight of electronics module
19.4 kg (43 lb)
ERM physical specifications
Parameter Value
Height
13.1 cm (5.2 in), 3U
Depth
66 cm (26 in)
Width
43.8 cm (17.2 in)
Weight
77 kg (170 lb)
Power cord specifications
Cord model number Description Input plug type Length
12kVA NA
12 kW UL input IEC 309-60 A 3.7 m (12 ft)
8kVA NA
12 kW UL input/output L21-30P 3.7/1.2 m (12/4 ft)

HP R1500 - UPS XR Specifications

General

Topology	Line Interactive
Input Connection	IEC 320 C14
Battery Type	Sealed Lead Acid (SLA)
Form Factor	Rackmount
Nominal Output Voltage	230V
Nominal Input Voltage	230V
Input Frequency	50/60 Hz
Typical Backup Time at Full Load	5 minutes
Transfer Time	4-8 ms
Hold-up Time	10 ms
Input Voltage Range	160 - 286 VAC
Interface Port	USB
Battery Recharge Time	3 hours
Communication Ports	USB
Waveform	Sine wave