HP Z200 - Small Form Factor Workstation Maintenance And Service Guide

CAUTION: Do not overtighten the heatsink screws. Overtightening can strip the threads in the
chassis.
9. Replace the airflow guide.
10. Replace the access panel (see
Installing the access panel on page 71).
11. Restore all connections and equipment that you removed during the
Predisassembly procedures
on page 68.
120 Chapter 5 Replacing components ENWW

HP Z200 - Small Form Factor Workstation Specifications

General

Brand	HP
Model	Z200 - Small Form Factor Workstation
Category	Desktop
Language	English