EasyManuals Logo

HP Z200 - Small Form Factor Workstation Maintenance And Service Guide

HP Z200 - Small Form Factor Workstation
199 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
Ensuring proper ventilation
Proper ventilation for the system is important for computer operation. Follow these guidelines to ensure
adequate ventilation:
Operate the computer on a sturdy, level surface.
Place the computer in an area with adequate ventilation. Provide at least 15.24 CM (6 inches) of
clearance at the front and back of the computer as shown in the following figure. (Your computer
might look different than the one shown.)
Figure 1-5 Proper computer ventilation
Ensure that the ambient air temperature surrounding the computer falls within the published limit.
NOTE: The ambient upper limit of 35 C is only good up to 1524 M (5000 FT) elevation. There is
a 1 C per 304.8 M (1000 FT) derating above 1524 M (5000 FT). So, at 3,048 M (10,000 FT), the
upper ambient air temperature limit is 30 C.
For cabinet installation, ensure adequate cabinet ventilation and ensure that the ambient
temperature within the cabinet does not exceed published limits.
Never restrict the incoming or outgoing airflow of the computer by blocking any vents or air intakes
as shown in the following figure.
Figure 1-6 Proper computer placement
ENWW Computer specifications 15

Table of Contents

Other manuals for HP Z200 - Small Form Factor Workstation

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Z200 - Small Form Factor Workstation and is the answer not in the manual?

HP Z200 - Small Form Factor Workstation Specifications

General IconGeneral
BrandHP
ModelZ200 - Small Form Factor Workstation
CategoryDesktop
LanguageEnglish

Related product manuals