EasyManuals Logo

HP Z200 - Small Form Factor Workstation Maintenance And Service Guide

HP Z200 - Small Form Factor Workstation
199 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
Copying a setup configuration to multiple computers
CAUTION: A setup configuration is model-specific. If source and target computers are not the same
model, file system corruption can result. For example, do not copy the setup configuration from an HP
xw8600 Workstation to an HP Z200 Workstation.
This method takes longer to prepare the configuration diskette, but copying the configuration to target
computers is fast.
A bootable diskette is required for this procedure. If Windows XP is not available to create a bootable
diskette, use the method for copying to a single computer instead (see
Copying a setup configuration
to a single computer on page 41).
1. Create a bootable diskette or USB media device.
2. Select a setup configuration to copy.
3. If you are using a diskette or USB storage device, insert it now.
4. Restart the computer.
5. As soon as the computer powers on, press and hold F10 until you enter the Computer Setup (F10)
Utility. If necessary, press Enter to bypass the title screen.
NOTE: If you do not press the F10 key at the appropriate time, you must restart the computer,
and then press and hold the F10 key again to access the utility.
If you are using a PS/2 keyboard, you might see a keyboard error message. Disregard it.
6. Select File>Replicated Setup>Save to Removable Media, and follow the instructions on the
screen to create the configuration diskette or USB media device.
7. Download a BIOS utility for replicating setup (repset.exe), and copy it to the configuration diskette
or USB media device. To obtain this utility, see
http://www.hp.com/support/files.
8. Enter the model number of the computer.
9. On the configuration diskette, create an autoexec.bat file containing repset.exe and cpqsetup.txt.
10. Power off the computer you are configuring, insert the configuration diskette or USB device, and
then power on the computer. The configuration utility runs automatically.
11. When the configuration is complete, restart the computer.
42 Chapter 4 System management ENWW

Table of Contents

Other manuals for HP Z200 - Small Form Factor Workstation

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Z200 - Small Form Factor Workstation and is the answer not in the manual?

HP Z200 - Small Form Factor Workstation Specifications

General IconGeneral
BrandHP
ModelZ200 - Small Form Factor Workstation
CategoryDesktop
LanguageEnglish

Related product manuals