HP Z200 - Small Form Factor Workstation Maintenance And Service Guide

Screen message Probable cause Recommended action
1803—Processor feature set
is insufficient for current
system settings
Processor feature set is insufficient for
current system settings. The BIOS
settings do not match the support
provided by the processor
Change the BIOS settings or upgrade the processor.
1804—A processor feature
and the memory configuration
are incompatible
A processor feature is incompatible
with the memory configuration.
Restore the previous memory configuration.
ERROR: Invalid 1394 GUID
(Invalid electronic serial
number)
No electronic serial number is stored
with the system.
To assign a serial number , select Security >System
IDs in the Computer Setup (F10) Utility.
ERROR: Invalid electronic
serial number (no number)
No electronic serial number is stored
with the system
To assign a serial number , select Security >System
IDs in the Computer Setup (F10) Utility.
ERROR: An unsupported
processor is installed. System
halted
Unsupported processor detected. Replace the processor.
ERROR: A processor requiring
too much power is installed.
System halted
Unsupported processor detected. Replace the processor.
Invalid electronic serial
number
Incorrect serial number registered in
the system.
To assign a serial number , select Security >System
IDs in the Computer Setup (F10) Utility.
Network Server Mode Active
and No Keyboard Attached
Keyboard not detected. Verify that a functioning keyboard is attached to the
computer.
Processor initialization fails Processor defective. Replace the processor.
Table 6-9 POST error messages (continued)
ENWW Diagnostic codes and errors 161

HP Z200 - Small Form Factor Workstation Specifications

General

Brand	HP
Model	Z200 - Small Form Factor Workstation
Category	Desktop
Language	English