selected. To manually switch to POST Messages Enabled during POST, press any key except
F1 through F12.
●
Specify an Ownership Tag, which appears when the computer is powered on or restarted.
●
Specify the Asset Tag or property identification number assigned by the company to this computer.
●
Enable power-on password prompts during system restarts (warm-starts) and power on.
●
Hide or show the integrated I/O functionality, including serial, USB, or parallel ports, audio, or
embedded NIC. Hidden devices are inaccessible, which increases system security.
●
Enable or disable removable media boot ability.
●
Enable or disable removable media write ability (if supported by hardware).
●
Replicate the computer setup by saving system configuration information on CD or diskette and
restoring it on computers.
●
Execute self-tests on specified SATA hard disk drives (if supported by the drive).
30 Chapter 4 System management ENWW
To Next Page
Loading...
Need help?
General