113
Viewing a Log File Through the CLI
Display Entire Log
1. Set terminal parameters, if you have not already done so. Refer to “Setting Terminal Parameters”
on page 22.
2. Enter the show logging command.
Show Most Recent Log Entries
To display the tail-end of the active log-file and display new log entries as they occur:
1. Set terminal parameters, if you have not already done so. Refer to “Setting Terminal Parameters” on
page 22.
It is recommended you set the terminal page length to 0 when using the end argument. Otherwise,
you will have to keep pressing the <space> bar to continue each time the maximum display length
is reached.
2. Enter the
show
logging
end
command.
The
show logging
command with the
end
argument locks the terminal window to display log
When using the
show logging
command without the
end
argument, log text is displayed a
page a time, as set by the
terminal length
parameter.data much like the UNIX
tail -f
command.
3. Enter <Ctrl> C to stop displaying log entries and resume control of the terminal screen.
Topspin-360# show logging
Nov 19 22:08:49 topspin-cc kernel: THH kernel module initialized successfully
Nov 19 22:09:17 topspin-cc ts_sma.x[746]: [INFO]: IB SMA v0.2
Nov 19 22:09:18 topspin-cc notifier.x[770]: [INFO]: Notifier v0.02
Nov 19 22:09:19 topspin-cc watchd_mgr.x[789]: [INFO]: Watchdog Manager v2.00
Nov 19 22:09:20 topspin-cc ip_mgr.x[812]: [INFO]: IP Manager v0.04
Nov 19 22:09:20 topspin-cc watchd_mgr.x[789]: [INFO]: process 4 is not up yet
Nov 19 22:09:21 topspin-cc fib_mgr.x[821]: [INFO]: FIB Manager v0.02
Nov 19 22:09:21 topspin-cc ip_mgr.x[812]: [INFO]: connected to watchd service, s
ent first pulse.
Nov 19 22:09:22 topspin-cc ib_mgr.x[843]: [INFO]: IB Manager v0.2
Nov 19 22:09:22 topspin-cc notifier.x[770]: [INFO]: connected to watchd service,
sent first pulse.
Nov 19 22:09:23 topspin-cc fib_mgr.x[821]: [INFO]: connected to watchd service,
sent first pulse.
Nov 19 22:09:23 topspin-cc srp_mgr.x[864]: [INFO]: SRP Manager v1.13, chassis-id
0x4000
Nov 19 22:09:23 topspin-cc ib_mgr.x[843]: [INFO]: connected to watchd service, s
ent first pulse.
Nov 19 22:09:23 topspin-cc srp_mgr.x[864]: [INFO]: Initializing DM.....
Nov 19 22:09:23 topspin-cc srp_mgr.x[864]: [INFO]: srpmDm initialized
<output truncated>
Topspin-90# show logging end
Jan 1 00:02:30 igr-cc port_mgr.x[534]: [INFO]: port up - port=5/0,
type=ipGateway
Jan 1 00:02:34 s9 fc_portagent.x[448]: [port_config.c:149]: set AdminSpeed -
port=9/2, speed=5
To Next Page
Loading...
Need help?
General
