HP zl User Manual

127
The Specify Devices dialog box appears.
3. Click the Add button to add another connected InfiniBand device to the Topology view.
The Add dialog box appears.
4. Enter the DNS name or the Management-Ethernet port IP address of the InfiniBand device in the
Device Name or IP Address field.
5. Enter the SNMP Community string for the InfiniBand device.
6. Check or uncheck the Device is Enabled box.
If the connected chassis is running and you want it included in the Topology Manager, check the
Device is Enabled toggle. You can also enable this later by going back to the Specify Device
window.
7. Click the Add button.
8. The connected device is added to the Topology view.
View the Internal Chassis Topology
1. Select InfiniBand --> Topology.
The Specify Devices dialog box appears (if this is a new Element Manager session).
2. Click the OK button.

HP zl Specifications

General

Model	HP zl
Managed	Yes
Dimensions	Varies by model
Weight	Varies by model
Layer	Layer 3
Power Supply	Redundant power supplies supported
Management	CLI, Web, SNMP
PoE	Optional
Stacking	Yes
Jumbo Frames	Supported
VLANs	Supported
MAC Address Table	Up to 64, 000 entries
Operating Temperature	0°C to 45°C
Product Series	ProCurve/Aruba zl Series