56
Examples of Valid P_Key Values
You can choose your own p_key values, or you can simply choose your values from the list in the
following table.
Understanding how P_Keys are Saved
Partition information is saved persistently by the master subnet manager. P_key information can be
synchronized between the master subnet manager and a slave subnet manager. The synchronization of
the subnet mangers means that the partition configuration (as well as other information) is exchanged
between the active and standby subnet managers. Therefore, the partition configuration will be
transferred in the event that an InfiniBand should fail.
The partition configuration is not saved persistently on a slave subnet manager.
If you have more than one InfiniBand switch in your fabric, refer to “Enable/Disable Database
Synchronization” on page 66.
If you are configuring one InfiniBand switch, it will automatically be the master, and the partition
configuration is saved persistently on the switch.
Create Partitions (CLI)
Partitions are described in detail in “About Partitions” on page 53.
7 0111
8 1000
9 1001
A 1010
B 1011
C1100
D1101
E 1110
F 1111
Table 6-6: Valid P_Key Values
Valid P_Key Numbers
00:01 00:11
00:02 00:12
00:03 00:13
00:04 00:14
00:05 00:15
00:06 00:16
00:07 00:17
00:08 00:18
00:09 00:19
00:10 00:20
Table 6-5: Binary Conversions
Hexadecimal Binary
To Next Page
Loading...
Need help?
General
