HP zl User Manual

40
3. Enter the following command:
config interface ib [{IB switch card/IB switch port | all }speed 1x | 4x ]
Example
Set IB Interface Speed to Auto-Negotiate
Set the InfiniBand interface speed to auto-negotiate if you want the speed of the transmit port and the
receiving port to automatically negotiate the highest possible speed. IB speed can be set on an
individual port basis, or all at once.
1. Enter the following command:
config interface ib [{IB switch card/IB switch port | all }auto-negotiate]
Example
View the IB Interface Speed
View the current speed of the InfiniBand interfaces:
1. Enter the following command:
show interface ib [IB switch card/IB switch port | all]
Example
Notifying Users
User notification commands send text messages to the terminal screens of all CLI users or to individual
users. These are convenient utilities for notifying everyone of an impending reboot or to notify single
users about special issues that apply only to them.
Topspin-360> enable
Topspin-360# config interface ib all speed 4x
Topspin-360> enable
Topspin-360# config
Topspin-360(config)# interface ib all
Topspin-360(config-if-ib-1/1-1/12)# auto-negotiate
Topspin-360(config-if-ib-1/1-1/12)#
Topspin-360> enable
Topspin-360#
show interface ib 15/1
===============================================================
InfiniBand Interface Information
==============================================================
....
....
auto-negotiate-supported : yes
auto-negotiate : enabled
admin-speed : 10gbps
oper-speed : unknown
....
....
***************************************************************

HP zl Specifications

General

Model	HP zl
Managed	Yes
Dimensions	Varies by model
Weight	Varies by model
Layer	Layer 3
Power Supply	Redundant power supplies supported
Management	CLI, Web, SNMP
PoE	Optional
Stacking	Yes
Jumbo Frames	Supported
VLANs	Supported
MAC Address Table	Up to 64, 000 entries
Operating Temperature	0°C to 45°C
Product Series	ProCurve/Aruba zl Series