HP zl User Manual

147
• InfiniBand Multicast group is deleted
• InfiniBand Partition is added
• InfiniBand Partition is deleted
• InfiniBand Multicast member is added
• InfiniBand Multicast member is deleted
• InfiniBand Node is added to a partition
• InfiniBand Node is deleted from a partition
• InfiniBand Node is added to subnet
• InfiniBand Node is deleted from subnet
Configuring SNMP Settings
Viewing Current SNMP Trap Receivers
1. Launch Element Manager, if you have not already done so.
2. Select Health --> Trap Receivers.
The Trap Receivers window appears.
Any previously configured Trap Receivers appear in the window.
If the Receive Events field is set to false (as in the example above), the Receiver is not set to
receive events.
Adding an SNMP Trap Receivers
1. Launch Element Manager, if you have not already done so.
2. Select Health --> Trap Receivers.
The Trap Receivers window appears.
3. Click the Insert button.

HP zl Specifications

General

Model	HP zl
Managed	Yes
Dimensions	Varies by model
Weight	Varies by model
Layer	Layer 3
Power Supply	Redundant power supplies supported
Management	CLI, Web, SNMP
PoE	Optional
Stacking	Yes
Jumbo Frames	Supported
VLANs	Supported
MAC Address Table	Up to 64, 000 entries
Operating Temperature	0°C to 45°C
Product Series	ProCurve/Aruba zl Series