HP zl

73
The Multicast Groups Summary page appears.
5. View the Multicast Global ID (MGID), which is the 64-bit multicast GID address for the multicast
group.
6. View the Queue Key (Q_Key), which is the 16-bit Q-Key of this multicast group. The queue key is
a construct that is used to validate a remote sender’s right to access.
7. View the Maximum Transmission Unit (MTU) for the multicast group.
8. View the partitions to which the multicast group belongs in the PKey field.
View Multicast Group Details
Using the General Tab
1. Launch Element Manager, if you have not already done so.
2. Select InfiniBand > Subnet Management
The Subnet Management window appears.
3. Click open a subnet manager from the left-navigation tree.
The navigation tree opens.
4. Click open the Multicast Groups folder from the navigation tree.
The Multicast Groups Summary page appears.