HPE FlexFabric 5700 Series Configuration Guide

49
Figure 13 Schematic diagram for a single-ring network
Tangent rings
As shown in Figure 14, two or more rings exist in the network topology and only one common node
exists between rings. You must define an RRPP domain for each ring.
Figure 14 Schematic diagram for a tangent-ring network
Intersecting rings
As shown in Figure 15, two or more rings exist in the network topology and two common nodes exist
between rings. You need only define an RRPP domain and configure one ring as the primary ring
and the other rings as subrings.

HPE FlexFabric 5700 Series Specifications

General

Product Line	HPE FlexFabric
Model	5700 Series
Power Supply	Redundant power supply options
Layer Support	Layer 2/3
Management	HPE Intelligent Management Center (IMC), CLI, SNMP
Routing Protocol	RIP, OSPF, BGP, IS-IS
Features	Virtualization
Compliant Standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1w, IEEE 802.1s, IEEE 802.3ad, IEEE 802.3ae
Operating Temperature	32°F to 113°F (0°C to 45°C)
Operating Humidity	10% to 90% (noncondensing)
Latency	Less than 1 µs