HPE FlexNetwork 5130 EI Series - Display and Maintenance Commands for FIB Table

118
To automatically save the IP forwarding entries periodically, configure a schedule for the device to
automatically run the
ip forwarding-table save command. For information about scheduling
a task, see Fundamentals Configuration Guide.
Procedure
To save the IP forwarding entries to a file, execute the following command in any view:
ip forwarding-table save filename filename
Display and maintenance commands for FIB table
Execute display commands in any view.
Task Command
Display FIB entries.
display fib
[ ip-address [ mask |
mask-length
] ]