EasyManuals Logo

HPE FlexNetwork 5130 EI Series Layer 3-Ip Services Configuration Guide

HPE FlexNetwork 5130 EI Series
265 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
38
expired { day day [ hour hour [ minute minute [ second second ] ] ] |
unlimited }
The default setting is 1 day.
7. (Optional.) Exclude the specified IP addresses in the address pool from dynamic allocation.
forbidden-ip ip-address&<1-8>
By default, all IP addresses in the DHCP address pool are assignable.
8. (Optional.) Exclude the specified IP addresses from automatic allocation in system view.
a. Return to system view.
quit
b. Exclude the specified IP addresses from automatic allocation globally.
dhcp server forbidden-ip start-ip-address [ end-ip-address ]
By default, except for the IP address of the DHCP server interface, IP addresses in all
address pools are assignable.
Specifying a primary subnet and multiple secondary subnets
in a DHCP address pool
About a primary subnet and multiple secondary subnets in a DHCP address pool
If an address pool has a primary subnet and multiple secondary subnets, the server assigns IP
addresses on a secondary subnet when the primary subnet has no assignable IP addresses.
Restrictions and guidelines
IP addresses specified by the forbidden-ip command are not assignable in the current address
pool, but are assignable in other address pools. IP addresses specified by the
dhcp server
forbidden-ip
command are not assignable in any address pool.
Specifying a primary subnet and multiple secondary subnets
1. Enter system view.
system-view
2. Enter DHCP address pool view.
dhcp server ip-pool pool-name
3. Specify the primary subnet.
network network-address [ mask-length | mask mask ]
By default, no primary subnet is specified.
You can specify only one primary subnet in each address pool. If you execute the
network
command multiple times, the most recent configuration takes effect.
4. (Optional.) Specify a secondary subnet.
network network-address [ mask-length | mask mask ] secondary
By default, no secondary subnet is specified.
You can specify a maximum of 32 secondary subnets in one address pool.
5. (Optional.) Return to address pool view.
quit
Setting the lease duration for dynamically allocation IP addresses
1. Enter system view.
system-view
2. Enter DHCP address pool view.

Table of Contents

Other manuals for HPE FlexNetwork 5130 EI Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HPE FlexNetwork 5130 EI Series and is the answer not in the manual?

HPE FlexNetwork 5130 EI Series Specifications

General IconGeneral
BrandHPE
ModelFlexNetwork 5130 EI Series
CategorySwitch
LanguageEnglish

Related product manuals