HPE FlexNetwork 5130 EI Series Layer 3-Ip Services Configuration Guide

186
By default, no SIP server address or domain name is specified.
6. Configure a self-defined DHCPv6 option.
option code hex hex-string
By default, no self-defined DHCPv6 option is configured.
7. Return to system view.
quit
8. Enter DHCPv6 address pool view.
ipv6 dhcp pool pool-name
9. Specify a DHCPv6 option group.
option-group option-group-number
By default, no DHCPv6 option group is specified.
Configuring the DHCPv6 server on an interface
About configuring the DHCPv6 server on an interface
Enable the DHCP server and configure one of the following address/prefix assignment methods on
an interface:
• Apply an address pool on the interface—The DHCPv6 server selects an IPv6 address/prefix
from the applied address pool for a requesting client. If there is no assignable IPv6
address/prefix in the address pool, the DHCPv6 server cannot to assign an IPv6 address/prefix
to a client.
• Configure global address assignment on the interface—The DHCPv6 server selects an
IPv6 address/prefix in the global DHCPv6 address pool that matches the server interface
address or the DHCPv6 relay agent address for a requesting client.
If you configure both methods on an interface, the DHCPv6 server uses the specified address pool
for address assignment without performing global address assignment.
Restrictions and guidelines
• An interface cannot act as a DHCPv6 server and DHCPv6 relay agent at the same time.
• Do not enable DHCPv6 server and DHCPv6 client on the same interface.
• You can apply an address pool that has not been created to an interface. The setting takes
effect after the address pool is created.
Procedure
1. Enter system view.
system-view
2. Enter interface view.
interface interface-type interface-number
3. Enable the DHCPv6 server on the interface.
ipv6 dhcp select server
By default, the interface does not act as a DHCP server or a DHCP relay agent, and discards
DHCPv6 packets from DHCPv6 clients.
4. Configure an assignment method.
{ Configure global address assignment.
ipv6 dhcp server {
allow-hint | preference preference-value |
rapid-commit } *

HPE FlexNetwork 5130 EI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5130 EI Series
Category	Switch
Language	English