HPE FlexNetwork 5130 EI Series Layer 3-Ip Services Configuration Guide

208
Display and maintenance commands for DHCPv6
client
Execute the display commands in any view, and execute the reset command in user view.
Task Command
Display the DHCPv6 client information.
display ipv6 dhcp client
[
interface
interface-type interface-number
]
Display the DHCPv6 client statistics.
display ipv6 dhcp client statistics
[
interface
interface-type
interface-number
]
Clear the DHCPv6 client statistics.
reset ipv6 dhcp client statistics
[
interface
interface-type
interface-number
]
DHCPv6 client configuration examples
Example: Configuring IPv6 address acquisition
Network configuration
As shown in Figure 77, configure the switch to use DHCPv6 to obtain configuration parameters from
the DHCPv6 server. The parameters include IPv6 address, DNS server address, domain name suffix,
SIP server address, and SIP server domain name.
Figure 77 Network diagram
Procedure
You must configure the DHCPv6 server first before configuring the DHCPv6 client. For information
about configuring DHCPv6 server, see "Configuring the DHCPv6 server."
# Configure VLAN-interface 2 as a DHCPv6 client for IPv6 address acquisition. Configure the
DHCPv6 client to support DHCPv6 rapid address assignment. Configure the DHCPv6 client to
create a dynamic DHCPv6 option group for saving configuration parameters.
<Switch> system-view
[Switch] interface vlan-interface 2
[Switch-Vlan-interface2] ipv6 address dhcp-alloc rapid-commit option-group 1

HPE FlexNetwork 5130 EI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5130 EI Series
Category	Switch
Language	English