54
Task Command
Display information about assignable IP
addresses.
display dhcp server free-ip
[
pool
pool-name
]
Display information about assigned IP
addresses.
display dhcp server ip-in-use
[
ip
ip-address |
pool
pool-name ]
Display information about DHCP address
pools.
display dhcp server pool
[
pool-name
]
Display DHCP server statistics.
display dhcp server statistics
[
pool
pool-name ]
Clear information about IP address conflicts.
reset dhcp server conflict
[
ip
ip-address ]
Clear information about lease-expired IP
addresses.
reset dhcp server expired
[
ip
ip-address
|
pool
pool-name
]
Clear information about assigned IP
addresses.
reset dhcp server ip-in-use
[
ip
ip-address |
pool
pool-name
]
Clear DHCP server statistics.
reset dhcp server statistics
DHCP server configuration examples
Example: Configuring static IP address assignment
Network configuration
As shown in Figure 17, Switch B (DHCP client) and Switch C (BOOTP client) obtain the IP address,
DNS server address, and gateway address from Switch A (DHCP server).
The client ID of VLAN-interface 2 on Switch B is
0030-3030-662e-6532-3030-2e30-3030-322d-4574-6865-726e-6574.
The MAC address of VLAN-interface 2 on Switch C is 000f-e200-01c0.
Figure 17 Network diagram
Procedure
1. Specify an IP address for VLAN-interface 2 on Switch A.
<SwitchA> system-view
To Next Page
Loading...
Need help?
General