HPE ProLiant DL385 Gen10 - Page 13

LFF power switch module LEDs and button
Item Description Status
1 UID button/LED
1
• Solid blue = Activated
• Flashing blue:
◦ 1 Hz/cycle per sec = Remote management or
firmware upgrade in progress
◦ 4 Hz/cycle per sec = iLO manual reboot
sequence initiated
◦
◦ 8 Hz/cycle per sec = iLO manual reboot
sequence in progress
• Off = Deactivated
2 Health LED
1
• Solid green = Normal
• Flashing green (1 Hz/cycle per sec) = iLO is
rebooting
• Flashing amber = System degraded
• Flashing red (1 Hz/cycle per sec) = System critical
2
Table Continued
Component identification 13