hpmont HD3N Series User Manual

Shenzhen Hpmont Technology Co., Ltd. Appendix A Parameters
HD3N Series User Manual V1.1 - 115 -
Ref. Code
Function Setting Range Default Unit Attribute Setting
F00.26
Action selection of HD3N
at zero-speed
Unit: Action selection of zero-speed
under V/f control
0: Do not process
1: HD3N does not output
2: HD3N runs at DC brake
Ten: Action selection of zero-speed
under open loop vector control
Hundred: Action selection of zero-
speed under torque control
0: Do not process
1: HD3N does nto output
2: HD3N runs at DC brake
3: HD3N runs at pre-excitation
111 1
×
F00.27
Command source binding
frequency source
Unit: keypad binds to frequency
source
Ten: Terminal binds to frequency
source
Hundred: SCI binds to frequency
source
0: No binding
1: Keypad digital
2; Terminal digital
3: SCI
5: Terminal pulse
7-8: AI1-AI2
b: Potentionmeter
C: PID
d: Multi-speed
000 1
×
F00.28 Function of STOP button
0: Valid in keypad control mode only
1: Valid in all control modes
0 1
○
F01: Protection of Parameters ( on pages 53 - 54)
F01.00 User password 00000 - 65535 0 1
○
F01.01 Menu mode
Units:
0: Full menu mode
1: Checking menu mode
Ten: Unused
Hundreds:
0: Group F can check after setting
password
1: Group F can not check after
setting password
000 1
○
A

hpmont HD3N Series Specifications

General

Brand	hpmont
Model	HD3N Series
Category	Inverter
Language	English