Huawei BTS3900A - Installing the Batteries and Related Cables

12.9 Installing the Batteries and Related Cables
This section describes the procedure and precautions for installing the batteries and related
cables.
Prerequisite
DANGER
Before installing the batteries, ensure that the battery MCBs on the EPS in the APM30H and in
the power distribution box in the battery cabinet are set to OFF to prevent high current.
Procedure
Step 1 Install the batteries from bottom to top and from left to right, as shown in Figure 12-67.
NOTE
The battery cell should be installed along the guide rails so that certain spacing is reserved between battery
cells.
DANGER
During the installation of the batteries, use insulated tools such as wrenches and screwdrivers,
and do not reversely connect the positive and negative poles. Otherwise, the batteries may be
burnt, and the installers may be injured.
Figure 12-67 Installing the batteries
BTS3900A(Ver.B)
Installation Guide 12 Installing the Cables
Issue 01 (2011-10-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
147