Huawei FusionDC1000A - Replacing ECC800-Pro Antennas; Replacing a SIM Card

To Next Page

To Previous Page

Figure 4-50 Replacing a PSU

----End

4.3.3 Replacing ECC800-Pro Antennas

Prerequisites

● Tools: ESD wrist strap, ESD gloves

● Materials: Spare ECC800-Pro antennas of the same model are available and

functional.

Procedure

Step 1 Remove the 4G antenna cables and RF_Z antenna cables connected to the ports

on the ECC800-Pro, as shown in Figure 4-51.

Figure 4-51 Removing antennas

Step 2 Install the spare 4G antenna cables and RF_Z antenna cables in the original

positions and connect them to the ECC800-Pro.

----End

4.3.4 Replacing a SIM Card

Prerequisites

● Tools: ESD wrist strap, ESD gloves

FusionDC1000A Prefabricated All-in-One Data

Center

Maintenance Guide (IT Scenario) 4 Parts Replacement

Other manuals for Huawei FusionDC1000A