About This Document
Purpose
This document describes the operation methods and precautions for the
FusionDC1000A prefabricated all-in-one data center (FusionDC1000 for short) in
terms of routine maintenance and parts replacement. It provides you a quick
grasp of the operation and maintenance (O&M) methods of the FusionDC1000.
Intended Audience
This document is intended for:
● Maintenance engineers
● Technical support engineers
● System engineers
● Hardware installation engineers
● Commissioning engineers
● Data
conguration engineers
Symbol Conventions
The symbols that may be found in this document are dened as follows.
Symbol
Description
Indicates a hazard with a high level of risk which,
if not avoided, will result in death or serious
injury.
Indicates a hazard with a medium level of risk
which, if not avoided, could result in death or
serious injury.
Indicates a hazard with a low level of risk which,
if not avoided, could result in minor or moderate
injury.
FusionDC1000A Prefabricated All-in-One Data
Center
Maintenance Guide (IT Scenario) About This Document
Issue 01 (2021-04-20) Copyright © Huawei Technologies Co., Ltd. ii
To Next Page
Loading...
Need help?
General