Huawei FusionDC1000A - Optional) Replacing a PAD

To Next Page

To Previous Page

Procedure

Step 1 Remove the old WiFi module from the USB port on the ECC800-Pro.

Step 2 Install the spare WiFi module in the original position.

Step 3 Log in to the ECC800-Pro WebUI.

Figure 4-64 Position of the WiFi module

----End

4.3.12 (Optional) Replacing a PAD

Prerequisites

A spare PAD of the same model is available and functional.

Impact on the System

None

Preparations

Tools: ESD wrist strap, ESD gloves, label, marker

Material: new PAD of the same model

Skill requirement: ELV engineer

Procedure

Step 1 Install the app on the spare PAD and connect the PAD to the network over the

WiFi hotspot of the data center.

Step 2 Specify the user name and password for the app on the spare PAD and log in to

check that the app works properly.

Step 3 Remove the old PAD from the support and install the spare PAD on the support.

----End

FusionDC1000A Prefabricated All-in-One Data

Center

Maintenance Guide (IT Scenario) 4 Parts Replacement

Other manuals for Huawei FusionDC1000A